Display Description - BST UDR-110 Manuel D'utilisation

UDR-110
RECEIVER STARTUP
- Installe the two antennas
- Orient them at 90 ° to the receiver
- Connect the external power supply
- Set the level control to the minimum position then push the power switch during 2 or 3s
- Set the frequency in using Up and Down buttons then press SET button to validate.
- To switch the receiver off, push the power switch during 2 or 3s

DISPLAY DESCRIPTION

4) ANTENNA A INDICATOR
The receiver is diversity, i will choose the best antenna for the best wireless transmition. This indicator lights on if the antenna A
is choosed.
5) ANTENNA A INDICATOR
The receiver is diversity, i will choose the best antenna for the best wireless transmition. This indicator lights on if the antenna B
is choosed.
6) MUTE INDICATOR
This logo is on when the mute function is enable ( no sound on output ). Either nobody talk on the transmitter, or frequency
between receiver and transmitter are differents.
7) FREQUENCY NUMBER INDICATOR
This indicator is the number corresponding to the current frequency
FREQUENCY SET
- Push the SET button :
- Use Up & Down buttons to set. The display flashes.
- Press SET button to validate the frequency
© Copyright LOTRONIC 2012
All manuals and user guides at all-guides.com
1)
2)
3)
RF INDICATOR
Shows you the RF level ( level received from the transmitter )
AF INDICATOR
Shows you the AF level ( level of main output )
CURRENT FREQUENCY
Shows you the current frequency
WWW.BSTDJ.COM
Page 11