Lock Function - BST UDR-110 Manuel D'utilisation

UDR-110
SQUELSH SET
Presse the SET button
-
After 2 or 3s, the display shows « XX* dB » ( * The value depends of the current set ). This value is the sensitivity level of the receiver.
-
Use Up and Down buttons to set the value.
-
- Press SET button to validate your choice

LOCK FUNCTION

- Press SET button
Display shows either « LOC ON » either « LOC OFF ». ( LOCK ON means the receiver is blocked on one frequency. No change is
-
possible and you cannot switch the receiver off ).
Use Up & Down to select either LOC ON, either LOC OFF.
-
Presse SET button to validate.
-
© Copyright LOTRONIC 2012
All manuals and user guides at all-guides.com
WWW.BSTDJ.COM
Page 12