Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
UDR 208
DESCRIPTION HANDHELD TRANSMITTER
BATTERIES INSTALLATION
To change the batteries of handheld mic :
- Unscrew teh batteries cover
- Pull out the low batteries.
- Insert the new batteries ( Be careful to the polarity of the batteries )
- Screw the batteries cover.
Note : If you want to user butil-in charger, you must to use rechargeable batteries ( not classic alkaline batteries )
SPECIFICATIONS
Receiver:
Frequency band :
Power supply :
Signal / noise ratio :
Output :
Sensitivity :
Operating range :
Dimensions :
Weight :
Transmitter :
Power supply :
Dimensions :
© Copyright LOTRONIC 2014 UDR‐208
1)
Cartridge
2)
Display
Show you channel number and corresponding frequency
3) Down button
Used to select the wireless channel ( from 1 to 8 )
4) Up button
Used to select the wireless channel ( from 1 to 8 )
5) ON/Mute/Off button
Put to on to switch the transmitter on and to enable wireless link
Put to mute to switch the transmitter of but disable the wireless link
put to off to switch the transitter off
4) batteries cover
UHF ( norm CE & FR )
AC/DC 13-15V / 1000mA
>85dB
300mV
-105dB
50 to 80m
396x235x50mm
1Kg
Batterries 1,5V ( 2pcs ) or rechargeable batterie 1,4V ( 2pcs )
250x51x51mm
WWW.BSTDJ.COM
Page 8
Publicité
Table des Matières
