Fagor Xperta CAT 44 NG Manuel D'utilisation page 29

All manuals and user guides at all-guides.com
• ... «CARRY OUT CLEANING
PROCESS» is displayed?
– Number of coffees dispensed
necessitates cleaning: Run cleaning
program; see „Running the Cleaning
Program".
• ... «CARRY OUT DESCALING»
is displayed?
– Number of coffees dispensed
necessitates descaling: Carry out
descaling; see „Running the
Descaling Program".
• ... the espresso/coffee is not hot
enough?
– Preheat the cups with hot water.
– Increase coffee temperature; see
„Setting the Coffee Temperature".
– The coffee machine may need
descaling.
• ... the espresso/coffee is too weak?
– not enough ground coffee: spoon in
correct measure, max. 2 measuring
spoons.
– The coffee bean container is empty.
Add coffee beans.
– The coffee quantity is set too low.
Increase the coffee quantity, see
„Changing and saving the coffee
quantity".
– The grinding texture is set too
coarse. Set the grinding texture to a
finer grade, see „Setting the
Grinding Texture".
• ...the crema is too weak?
– Use fresh water.
– Use fresh beans or fresh coffee
powder.
– Clean the coffee-making unit, see
„Cleaning the Coffee-making Unit".
• ...milk is not frothy enough?
– The milk is too hot or too old or the
fat content is too high. Use suitable
milk.
– Blocked steam nozzle. Clean the
steam nozzle.
– The air intake in the frothing aid is
blocked. Clean the frothing aid.
• ... the bean container will not locate
on the grinder?
– Coffee bean residue on or around
the grinder: Remove coffee bean
residue from the grinder.
– Coffee bean residue is jammed in the
bean container lock. Clear the bean
container lock of coffee bean
residue.
• ... the grinder makes very loud noises
when grinding?
– The grinder is blocked by a foreign
body. Remove the foreign bodyas
described in this manual, refer to
„Cleaning the Grinder".
– You can continue to use your coffee
machine with ground coffee.
• ... the coffee machine has to be
transported?
– Keep the original packaging as
transport protection.
– Secure the coffee machine against
jarring.
– Empty the coffee machine tank and
container and allow any remaining
moisture in the system to steam off.
This will protect your coffee machine
from being damaged by freezing in
cold weather.
To steam off the system, remove
water tank and then select the
steam function. When no more
steam is released, turn off the steam
tap and switch off the coffee
machine.
– Care should also be taken with the
location of the coffee machine –
especially in cold weather, when
damage can be caused by freezing.
• ....."LOOSEN BREW UNIT"?
- Remove the brewing unit and
loosen the brewing unit with at
least 3 revs. on the back side,
using the tool function of the
measuring spoon P.
GB