Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
10
Programming the cup
measure and the coffee
quantity
The coffee machine is factory-set to
standard measures. These measures can
be individually changed to your own
taste and saved for each cup size.
10.1 Changing and saving the cup
measure and the coffee quantity
Here it is possible to change and save
the cup measure for each of the three
cup sizes and for coffee bean mode
also the coffee quantity. To program
the setting correctly, note the order:
– First select the cup size for which
you wish to make the settings.
– Next select the coffee quantity (only
for coffee bean mode) (i.e. how
strong you want the coffee to be).
– Then determine how full the cup is
to be filled.
First press the „Cup Size" key (Fig. 3, d)
until the cup symbol is illuim-
inated for which you want set the cup
measure. The display shows e.g.
«1 CUP
LARGE».
Only with coffee bean mode: Next
press the „Coffee Quantity" key (Fig. 3,
c)
until the desired coffee
quantity symbol illluminates. The dis-
play shows e.g. «STRONG».
The top line in the display indicates the
selected cup size. The bottom line in
the display indicates the selected cof-
fee quantity.
Place a corresponding cup under the
coffee dispenser (e.g. coffee mug).
Next press the „OK" key (Fig. 3, g) and
keep it pressed until the desired cup
measure is reached.
During the filling the display indicates
LEVEL» ; the bar indicator in
«CUP
the bottom line moves up. The max.
bar indication corresponds to the max.
possible cup measure of ca. 240 ml.
When you save the cup measure in
coffee bean mode, firstly the grinder
starts and grinds the coffee. Keep the
„OK" key pressed (Fig. 3, g) until the
desired cup measure is reached.
Release the key once your desired cup
measure is reached. This cup measure is
now saved. The display briefly indicates
«PROGRAMMED».
Repeat the action if you would also
like to adjust the measures for the
other cup sizes.
The machine switches off automati-
cally on reaching the max. cup meas-
ure. The saved values are retained also
when the machine is switched off. If
you would like to change your cup size
or flavour, you can individually adjust
the cup measure at any time or return
them to the factory setting with a
reset. You will find which settings are
reset under „Resetting the machine to
the factory setting (Reset)".
The saving of the cup measure is only
possible for 1 cup. For dispensing of 2
cups the saved values are doubled.
Publicité
Table des Matières
