Handy Features (For Tv/Av Mode); Pausing The Screen (Freeze); Switching Power Off After A Specified Length Of Time (Sleep) - Sharp LL-M17W1U Mode D'emploi

Handy features (for TV/AV mode)

Pausing the screen (FREEZE)

This feature pause the image from the TV or other
connected AV equipment. This is handy when you
want to write down a recipe or the address for a
prize contest.
Perform this operation using the remote control.
POWER
PC TV AV1 AV2
FREEZE PIP VIEW MODE
SLEEP MENU
ENTER
BRIGHT
BRIGHT
MODE
DISPLAY CC MTS MUTE
VOL
CH
FLASHBACK
1. Press the FREEZE button.
The images will pause.
Canceling pausing
1. Press the FREEZE button again.
Notes:
- You cannot pause the TV or video image in the
picture-in-picture window.
- Changing channels or switching the display
mode (input) automatically cancels pausing.
g02.P65
All manuals and user guides at all-guides.com
E51
51
Switching power off after a specified
length of time (SLEEP)
The monitor can automatically switch off (standby)
after a specified length of time. This is handy if you
want to watch the monitor at bedtime.
Perform this operation using the remote control.
POWER
PC TV AV1 AV2
FREEZE PIP VIEW MODE
SLEEP MENU
ENTER
BRIGHT
BRIGHT
MODE
DISPLAY CC MTS MUTE
VOL
CH
FLASHBACK
1. Press the SLEEP button.
2. Specify in how many minutes you want the
monitor to switch off by pressing the SLEEP
button.
The time changes in the following order each
time you press the button:
30 min → 60 min → 90 min → 120 min →
150 min → --- min → 30 min
When the specified time elapses, the monitor
automatically switches off and clears the SLEEP
timer.
Checking the time remaining on the SLEEP
timer
1. Press the DISPLAY button.
The time remaining on the SLEEP timer will be
displayed for about 5 seconds. You can also
check the time remaining by pressing the SLEEP
button once.
Changing the specified time
1. Press the SLEEP button.
The remaining time will be displayed.
2. Change the specified time by pressing the
SLEEP button several times as needed.
8/22/2003, 6:07 PM