Sharp LL-M17W1U Mode D'emploi page 58

Preventing changes to adjusted
values (ADJUSTMENT LOCK)
Disabling the control buttons other than the
following buttons (monitor and remote control)
prevents adjusted values from being changed.
The changing of adjusted values for not only TV/
AV mode, but for PC mode as well will be
prevented.
[Monitor]
- MAIN POWER button
- VOL/BRIGHT buttons
- INPUT button
- CH buttons
[Remote control]
- POWER button
- VOL buttons
- MUTE button
- Input buttons (PC, TV, AV1, and AV2)
- CH buttons
- Channel buttons (0-9 and 100)
- FLASHBACK button
Perform this procedure on the monitor.
1. Turn off the monitor power.
2. While pressing the MENU button, press the
MAIN POWER button (i.e. turn the power on).
Continue to press the buttons until
"ADJUSTMENT LOCKED" appears on the
screen. The lock is set when the message is
displayed.
Releasing the adjustment lock
Perform this procedure on the monitor.
1. Turn off the monitor power.
2. While pressing the MENU button, press the
MAIN POWER button (i.e. turn the power on).
Continue to press the buttons until
"ADJUSTMENT UNLOCKED" appears on the
screen. The lock is released when the message
is displayed.
CAUTION!
- When the adjustment lock is set, all buttons on
the monitor and remote control other than the
above buttons are disabled. To use buttons other
than the above buttons, release the adjustment
lock.
g02.P65
All manuals and user guides at all-guides.com
Adjusting the display
E56
56
Resetting adjustment values for
specific menu (RESET)
Adjustment values for the selected menu can be
reset to their original factory settings.
Resetting will be applied to both TV mode and AV
mode.
Resetting is not possible while the adjustment lock
is set. Release the adjustment lock before
resetting.
1. Select the TV mode or AV mode using the INPUT
button (monitor) or the TV, AV1 or AV2 button
(remote control).
2. Display the MENU screen using the MENU
button.
MENU
VIDEO ADJUST
CHANNEL SETTING
MODE SELECT
CLOSED CAPTION
V-CHIP BLOCK
3. Select the menu to reset using the MENU button
(monitor) or the buttons (remote control),
and press the ENTER/BRIGHT MODE button
(monitor) or the ENTER button (remote control).
A list of options will appear.
4. Select "RESET" using the MENU button
(monitor) or the buttons (remote control),
and press the ENTER/BRIGHT MODE button
(monitor) or the ENTER button (remote control).
5. Exit the MENU screen using the INPUT button
(monitor) or the MENU button (remote control).
Resetting is complete.
8/22/2003, 6:07 PM
< >
TV/AV
>>
>>
>>
>>
>>