HACH LANGE sensION+ PH31 Manuel D'utilisateur page 17

4. Operation
4.9.3. Measurement
Once the measurement has finished, the corresponding report
will be printed automatically.
The report can be "reduced", "standard" or "GLP" in accord-
ance with the selected option in "System", see page 16.
Reduced report (factory programming)
10-04-2010 17:15
pH MEASURE
New calibration
in 1 day
By Stability
...
Start measurement
MEASURING
by stability
pH * * * *
Sample 1 00:01
etc.
Standard and GLP report
10-04-2010 17:15
pH MEASURE
New calibration
in 1 day
10-04-2010 17:15
Users
Antonio Sanz
User 2
User 3
User 4
By Stability
...
Start measurement
MEASURING
by stability
pH * * * *
Sample 1 00:01
etc.
Sample report (see System)
Several: The results from the different samples will be printed
one by one until the option MEASURE is quitted.
One: A complete report per sample.
Voluntary printing and report repetition (copies)
During measurement in continuous, pressing the key
measured value at that moment is printed. If the measurement is
by stability pressing the key
be obtained.
(If a PC keyboard is used, it must be pressed F1 key).
sensION+ PH31 HACH_LANGE 0710.indd ANG:13 sensION+ PH31 HACH_LANGE 0710.indd ANG:13
All manuals and user guides at all-guides.com
When measuring in
continuous with factory
programming, the obtained
data is printed at the end
of the measurement.
MEASURING ( )
continuous
pH 5.26
25˚C 25˚C
Sample 1 00:01
etc.
MEASURING ( )
continuous
pH 5.26
25˚C 25˚C
Sample 1 00:01
etc.
a copy of the printed report can
Example of reports:
Reduced report.
REPORT of MEASUREMENTS
Thursday, 14 February 2010
----------------------------------------
CONDITIONS
STABILITY MEASUREMENTS STANDARD CRITERIA
----------------------------------------
Sample
---------------
000001
000002
----------------------------------------
Standard report.
Laboratory
Test
========================================
REPORT of MEASUREMENTS
Thursday, 14 February 2010
----------------------------------------
pH ELECTRODE
Code:
Serial number:
pHiso.(pH 7):
CALIBRATED 14-02-2010 08:50:37
----------------------------------------
CONDITIONS
STABILITY MEASUREMENTS STANDARD CRITERIA
----------------------------------------
Sample
---------------
000001
000002
----------------------------------------
User: Pedro Martínez
----------------------------------------
GLP report.
Laboratory
Test
========================================
REPORT of MEASUREMENTS
Thursday, 14 February 2010
----------------------------------------
pH ELECTRODE
Code:
Serial number:
pHiso.(pH 7):
CALIBRATED 14-02-2010 08:50:37
Technical
Buffers
-------------
4.01, 7.00
----------------------------------------
CONDITIONS
STABILITY MEASUREMENTS STANDARD CRITERIA
----------------------------------------
Sample
---------------
000001
000002
the ----------------------------------------
User: Pedro Martínez
----------------------------------------
SN:70802 V1.10
08:53
CHANNEL 1
pH Ts'C Time St%
------- ---- ------ ---
4.01 23.7 00:08 25
4.01 23.8 00:11 25
SN:70802 V1.10
08:53
50 14T
7890
pH 7.00
CHANNEL 1
pH Ts'C Time St%
------- ---- ------ ---
4.01 23.7 00:08 25
4.01 23.8 00:11 25
SN:70802 V1.10
08:53
50 14T
7890
pH 7.00
Sens. A.P. T. t. St.
% mV 'C s %
----- ----- ---- --- ---
100.3 -0.1 25 6 25
CHANNEL 1
pH Ts'C Time St%
------- ---- ------ ---
4.01 23.7 00:08 25
4.01 23.8 00:11 25
13
8/7/10 16:45:05 8/7/10 16:45:05