BGS technic 40106 Mode D'emploi page 16

Checking the « CENTRIFUGAL ADVANCE» and «VACUUM ADVANCE»
1. Follow the steps 1 to 4 of general procedures on Page 2 except increase the engine speed to
2000 rpm.
2. Trigger the timing light and rotate the knob clockwise slowly and stop until the timing mark moves
to « T.D.C» or « o» position.
3. Read the advance angle reading from the LED display
4. Сompare the reading with manufacturer's specification
Tach and Advance
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
DOT POINT FLASH
for 2 stroke and direct-ignition-system
Figure 1
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
- 6 -
BLACK
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
RED