NEC MultiSync LCD1980SXi Mode D'emploi page 52

Appendix
Tag 3
Signal Determines when the auto adjust is performed. The choices are
"OFF", "SIMPLE" and "FULL". Press "+" or "-" to select.
(Analog input only)
Signal
Setting
OFF
SIMPLE
FULL
O : Automatic adjustment is performed on adjustments marked with *.
X : Automatic adjustment is not performed.
NOTE: Automatic adjustment does not work at a resolution lower than
800x600.
Auto SW Determines which items are adjusted. The choices are "SIMPLE",
"FULL", and "DETAIL". Press "+" or "-" to select. See table below.
(Analog input only)
Sets the "Auto Adjust Level" as shown in the table below.
"Size" "Fine"
"Position"
SIMPLE O
FULL O
DETAIL O
O : Automatic adjustment is performed.
X : Automatic adjustment is not performed.
*1: Black level, RGB sharpness, RGB delay and RGB position are adjusted using
the Long Cable Software. To download the software, please visit our website at
www.necmitsubishi.com.
Tag4
Auto Automatically adjusts the Image Position and H. Size (or V. Size)
settings and Fine settings. Press "SELECT" to activate Auto Adjustment.
(Analog input only)
H. Position Controls Horizontal Image Position within the display area of the LCD.
Press "+" or "-" to adjust.
V. Position Controls Vertical Image Position within the display area of the LCD.
Press "+" or "-" to adjust.
H. Size Adjusts the horizontal (or vertical) size of the screen. If the
"AUTO Adjust function" does not provide a satisfactory picture
(OSM Rotation: Landscape)
V. Size setting, a further tuning can be manually performed using the "H.Size
(or V.Size)" a further tuning can be manually performed using the
(OSM Rotation: Portrait)
"H.Size (or V.Size)" function (dot clock). For this a Moiré test pattern
(Analog input only)
could be used. This function may alter the width of the picture. Use
left/Right Menu to center the image on the screen. If the H.Size (or
V.Size) is wrongly calibrated, the result would look like on the left
drawing. The image should be homogeneous.
LCD1980SXimanual060704.p65
–continued
Input Signal
New signal Re-input "H-size" "Fine" "H/V-Position"
O X
O O
O O
"Contrast"
Long cable capability *1
X
O
O
50
50
Adjustment Items
Contrast
* X
* X
* *
Black level,
Time
X 1.5 seconds
X 2 seconds
O 10 to 20 seconds
6/10/04, 9:28 AM