NEC MultiSync LCD1980SXi Mode D'emploi page 56

Appendix
Tile Comp Works in tandem with Tile Matrix (Tag9) to compensate for the width
of the tile bezels in order to accurately display the image.
Sync Threshold Adjusts the slice level of a synchronization signal. Press "+" or "–" to
select.
(Analog input only)
Tag9
Display Mode Provides information about the current display resolution and techni-
cal data, including the preset timing currently being used and the
horizontal and vertical frequencies. Increases or decreases the current
resolution. Press "SELECT" to move the adjustment mode, and press
"+" or "–" to adjust.
Monitor Info Indicates the model and serial numbers of your monitor.
Tile Matrix Tile Matrix demonstrates multiple screens. Press "SELECT" to move
adjustment menu. This feature provides a single large screen using 4,
9, 16 and 25 monitors. This requires you to feed the PC output into
each of the monitors through a splitter. Specify the number of moni-
tors and determine the monitor numbers by referring to the figures in
menu.
LCD1980SXimanual060704.p65
–continued
Tile Comp ON
54
54
Tile Comp OFF
6/10/04, 9:28 AM