Dmx512 Connection - HQ Power VDPL121RGB Notice D'emploi

7 Auto run
8 Sound activation – colour change
5-9 Sound activation – light output change
9 RGB colour effect - random
6-9 Red run effect
7-9 Green run effect
8-9 Blue run effect
6-7-9 RG run effect
6-8-9 RB run effect
7-8-9 GB run effect
6-7-8-9 RGB run effect
7. DMX512 Mode
Operation through a DMX controller allows you create own programs:
• Connect a controller with a standard DMX cable.
• Switch on DIP switch 10; set the address with DIP switches 1 to 9.
Channel
1 Strobe function
2
3
4
5 Red – part 1
6 Green – part 1
7 Blue – part 1
8 Red – part 2
9 Green – part 2
10 Blue – part 2
11 Red – Part 3
12 Green – part 3
13 Blue – part 3
14 Red – Part 4
15 Green – part 4
16 Blue – part 4
17 Colour effects

• DMX512 Connection

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDPL121RGB. Multiple VDPL121RGBs can be linked through serial linking. The linking cable
should be a two-core screened cable with XLR input and output connectors.
• DMX512 Chain with Termination
VDPL121RGB
All manuals and user guides at all-guides.com
Function From
0
1
Red 0
Green 0
Blue 0
0
0
0
0
0
0
0
0
0
0
0
0
0
A DMX terminator is recommended for installations where the DMX cable has to run a
long distance or is in an electrically noisy environment (e.g. discos). The terminator
prevents corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120 resistor between pins 2 and 3, which is then plugged into
the XLR output socket of the last device in the chain.
Please see illustrations.
To Description
0 ON
255 From slow to fast
255
255
255
255
255
255
255
255 From 0 – 100 % output
255
255
255
255
255
255
255
255 Random effect from fast to slow
5
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
4-3-2-1 ON
HQPOWER