Bosch HMV9302 Instructions D'installation page 7

Électroménagers four à micro-ondes avec hotte
Masquer les pouces Voir aussi pour HMV9302:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AVOID ELECTRICAL SHOCK! THIS APPLIANCE MUST BE GROUNDED!
1. Locate the grounded electric outlet for this oven in the cabinet
above the oven, as shown in Figure 4 Detail.
NOTE: The outlet should be on a circuit dedicated to the
microwave oven 120V, 60Hz., AC only with a 15 or
20A fused electrical supply.
IMPORTANT: If you do not have the proper wall outlet, you
MUST have one installed by a qualified
electrician.
2. You will cut the power-supply-cord hole (shown in Figure 4 Detail)
later when you prepare the wall and upper cabinet in Step 4.
NOTE: Do not use an extension cord.
Keep the power cord dry and do not pinch or crush it.
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLY
CORD GROUNDING PRONG! This appliance MUST be grounded!
STEP 1:
ELECTRICAL CONNECTIONS
W A R N I N G
W A R N I N G
Improper grounding could result in
electric shock or other personal injury.
PREPARE THE
Upper
Cabinet
7
Grounded Outlet
( Inside Cabinet )
Power-Supply-Cord Hole
Figure 4 Detail

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hmv9303Hmv9305Hmv9306Hmv9307

Table des Matières