Using The Timer; Setting The Clock; Using The Sleep Timer - Panasonic SC-PM46 Manuel D'utilisation

Using the timer

Setting the clock

Setting the clock
This is a 12-hour clock.
Press [CLOCK/TIMER] to select "CLOCK".
1
Each time you press the button:
CLOCK
2 Within 5 seconds, press [ /4] or [ /¢] to set the time.
Press [CLOCK/TIMER] again to confirm.
3
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust
as necessary.
Using the play timer Using the play timer
You can set the play timer to come on at a certain time to wake you
up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio, USB or
music port source, and set the volume.
Press [CLOCK/TIMER] repeatedly to select play timer.
1
CLOCK
2 Within 5 seconds, press [ /4] or [ /¢] to set the
starting time.
Press [CLOCK/TIMER] to confirm.
3
4 Repeat steps 2 and 3 to set the finishing time.
10
10
All manuals and user guides at all-guides.com
˚ PLAY
Original display
˚ PLAY
Original display
Start time
Play timer indicator
Finish time
To activate the timer
Press [˚ PLAY] to turn on your timer.
5
"˚ PLAY" is displayed.
6 Press [y] to turn off the unit.
The unit must be off for the timer to operate.
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source 1) Press [˚ PLAY] to clear the timer
or volume indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings Press [CLOCK/TIMER] repeatedly to
select ˚ PLAY.
(when the unit is on
or in standby mode)
cancel Press [˚ PLAY] to clear the timer indicator
from the display.
Note
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes
on, the system turns on and engages MUSIC PORT as the source.
If you wish to play back from the portable audio equipment, activate
the equipment's play mode and increase the volume. (See the
portable audio equipment's instruction manual.)

Using the sleep timer

Using the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select "OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again
to select your desired time.
Note
• The play and sleep timer can be used together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.