Using The Fm/Am Radio; Manual Tuning; Memory Preset; Fm Allocation Setting - Panasonic SC-PM46 Manuel D'utilisation

Masquer les pouces Voir aussi pour SC-PM46:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the FM/AM radio

Manual tuning

Manual tuning
1
Press [FM/AM] to select "FM" or "AM".
2
Press [PLAY MODE] to select "MANUAL".
3
Press [ /4] or [ /¢] to select the frequency of the
required station.
" ST " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [ /4] or [ /¢] for a moment until the frequency starts
changing rapidly. The unit begins auto tuning, stopping when it fi nds
a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [ /4] or [ /¢] once again.
To improve FM sound quality
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO" disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
All manuals and user guides at all-guides.com
Up to 20 stations can be set in the FM band and 15 stations in the
AM band.
Preparation
Press [FM/AM] to select "FM" or "AM".
Press and hold [PROGRAM] to start presetting.
Press [PLAY MODE] to select "MANUAL".
1
2
Press [ /4] or [ /¢] to tune to the required station.
3
Press [PROGRAM].
4
Press numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.
Repeat steps 2 to 4 to preset more stations.
5
Press numeric buttons to select the channel.
For two-digit channel, press [h10], then the two digits.
OR
1
Press [PLAY MODE] to select "PRESET".
2
Press [ /4] or [ /¢] to select the channel.
By main unit only
This system can also receive FM broadcasts allocated in 0.1 MHz
steps.
To change the step to 0.1 MHz
Press and hold [FM].
1
After a few seconds the display changes to a fl ashing display of
the current minimum frequency.
Continue to hold down [FM].
2
• When the minimum frequency changes, release the button.
• After the setting is changed, any previously preset frequency

Memory preset

Memory preset
Automatic presetting
Automatic presetting
Manual presetting
Manual presetting
Selecting a preset station
Selecting a preset station

FM allocation setting

FM allocation setting
To return to the original step, repeat the above steps.
will be cleared.
9
9

Publicité

Table des Matières
loading

Table des Matières