External Equipment; Using The Auxiliary Input - Panasonic SC-MAX4000 Mode D'emploi

External equipment

Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate
operating instructions.
Note:
Components and cables are sold separately.

Using the auxiliary input

You can connect a VCR, DVD player etc. and listen to the
audio through this system.
Rear panel of
this main unit
1
Connect the external equipment.
2
Press [CD/RADIO/AUX] to select "AUX 1".
3
Play the external equipment.
Note:
•
If you want to connect equipment other than those
described, refer to the audio dealer.
•
Sound distortion can occur when you use an adaptor.
16
16
DVD player
(not supplied)
Audio cable
(not supplied)
Connecting a portable audio equipment
You can play music from a portable audio equipment.
Preparation
• Switch off the equaliser (if any) of the portable audio
equipment to prevent sound distortion.
• Decrease the volume of the system and the portable
audio equipment before you connect or disconnect the
portable audio equipment.
Audio cable
(not supplied)
Portable audio
equipment
(not supplied)
1
Connect the portable audio equipment.
Plug type: Ø 3.5 mm stereo
2
Press [CD/RADIO/AUX] to select "AUX 2".
3
Play the portable audio equipment.
To adjust the input level
1
Press [PLAY MENU] to select "INPUT LEVEL".
2
Press [Y, U] to select "NORMAL" or "HIGH" and
then press [OK].
Note:
•
You cannot adjust the input level during recording.
•
Select "NORMAL" if the sound is distorted during "HIGH"
input level.
•
Read the operating instructions of the portable audio
equipment for details.