Additional Safety Rules - Hilti SID 2-A Mode D'emploi

4.1.6 Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.

4.2 Additional safety rules

4.2.1 Personal safety
a) Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
b) Modification of the machine or tampering with its parts is not
permissible.
c) Do not look directly into the light source (LEDs) integrated in the
cordless impact screwdriver and do not direct the light at other
people's faces. This presents a risk of dazzling or eye damage.
d) Improve the blood circulation in your fingers by relaxing your hands
and exercising your fingers during breaks between working.
e) Avoid touching rotating parts. Switch the power tool on only after
bringing it into position at the workpiece. Touching rotating parts,
especially rotating insert tools, may lead to injury.
Activate the safety lock (forward / reverse switch in the middle
f)
position) before storing or transporting the power tool.
g) The appliance is not intended for use by debilitated persons who
have received no special training. Keep the appliance out of reach
of children.
h) Dust from materials, such as paint containing lead, some wood species,
concrete / masonry / stone containing silica, and minerals as well as
metal, may be harmful. Contact with or inhalation of the dust may cause
allergic reactions and/or respiratory or other diseases to the operator or
bystanders. Certain kinds of dust are classified as carcinogenic such
as oak and beech dust, especially in conjunction with additives for
wood conditioning (chromate, wood preservative). Material containing
asbestos must only be treated by specialists. Where the use of a dust-
extraction device is possible it shall be used. To achieve a high level
of dust collection, use a suitable dust extractor. When indicated
wear a respirator appropriate for the type of dust generated. Ensure
that the workplace is well ventilated. Follow national requirements
for the materials you want to work with.
i) Always hold the tool securely by the grip. Keep the grip dry, clean
and free from oil and grease.
Printed: 12.11.2014 | Doc-Nr: PUB / 5206129 / 000 / 00
All manuals and user guides at all-guides.com
en
9