Items Supplied - Hilti SID 2-A Mode D'emploi

personnel must be informed of any special hazards that may be encountered.
The power tool and its ancillary equipment may present hazards when used
incorrectly by untrained personnel or when used not as directed.
Observe the national health and safety requirements.

2.2 Items supplied

en
1 SID 2-A cordless impact screwdriver
1 Operating instructions
Accessories can be found at your Hilti Center or online at www.hilti.com.
2.3 Additional items required for operating the cordless impact
screwdriver:
B 12/2.6 Li-ion battery and C 4⁄12­50 charger.
2.4 Features
The cordless impact screwdriver features a vibration-absorbing grip as well
as overloading, overheating and deep discharge protection.
2.5 Battery charge status indicator
The battery features a charge status LED display. When the release button
on the battery is pressed, the battery charge status is indicated by four LEDs.
LEDs light constantly
LED 1, 2, 3, 4
LED 1, 2, 3
LED 1, 2
LED 1
-
NOTE
The charge status cannot be indicated while the tool is in operation.
NOTE
The charge status display LEDs may light briefly while the battery is being
fitted to the cordless impact screwdriver.
4
Printed: 12.11.2014 | Doc-Nr: PUB / 5206129 / 000 / 00
All manuals and user guides at all-guides.com
LEDs blink
-
-
-
-
LED 1
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %