Hilti SID 2-A Mode D'emploi page 9

3 Technical data
Right of technical changes reserved.
Power tool
Rated voltage
Weight in accordance with EPTA
procedure 01/2003
Rated speed under no load
Impact speed
Chuck
NOTE
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for
different applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the exposure
level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period. Identify additional
safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation
of work patterns.
Noise information (measured in accordance with EN 60745­1):
Typical A-weighted sound power
level, L
WA
Typical A-weighted emission sound
pressure level, L
pA
Uncertainty for the given sound
level, K
Triaxial vibration values (vibration vector sum) (measured in accord-
ance with EN 60745­2­2):
Impact driving of screws with a
maximum size of, a
Uncertainty, K
Printed: 12.11.2014 | Doc-Nr: PUB / 5206129 / 000 / 00
All manuals and user guides at all-guides.com
SID 2­A
10.8 V
1.1 kg
0...2,500/min
Max. 3,410/min
¹/₄" hex. socket with locking sleeve
92 dB (A)
103 dB (A)
3 dB (A)
16.5 m/s²
h
1.5 m/s²
en
5