Description Display Symbols; Changing The Water In The Boiler - La Cimbali M39 Class GT Utilisation Et Installation

This symbol indicates the boiler water level.
During the loading phase, the dark bottom part of
the icon blinks.
When the optimum level is reached, the symbol looks like
this:
This symbol (dark inside) indicates that the
resistance is activated and functioning.
When the boiler pressure reaches the set value, the icon
looks like this
When the machine is in operation, the two icons
alternate on the display, indicating the presence of the electric
heating.
Note: the customer cannot switch on or switch off the
electric heating.
When the on/off function is programmed, the electric heating
takes place automatically.
This indicates that not only the heating resistance,
but also the boiler resistances have been
disabled.
Before operating the machine change the water
in the boiler."
Ensure that the indication on the display corresponds to the
working pressure value.
Keep a hot water distributor key (12) pressed down for
approximately 5 seconds.
The following message will be displayed: "WATER ChANGE".
The water from the boiler will drain from the hot water nozzle
(8) (60 - 70% ca. of the total capacity).
The boiler resistance and all dispensing keys will be
disabled.
Dispensing will stop automatically (Note. The delivery can
be interrupted in whichever moment by means of the push
button STOP 35).
After the procedure, the machine will return to its normal fun-
ctions and the boiler will be refilled with fresch water.

Description display symbols

(light inside).

8. Changing the water in the boiler

This symbol indicates the boiler pressure value.
If the RES (24) key is pressed for about 3", the pressure
gauge and the boilers temperatures will be displayed
analogically. This will be shown on the display:
22 APR 09
88.6°C 89.4°C
Press and hold down the RES (24) key for about 3 seconds
to return to the regular display mode.
This symbol indicates that the machine is pre-heating
or the boiler pressure has dropped below 0.5 bar.
This also indicates the boiler heating situation, meaning
that it appears if one or more boilers are still in the first heating
phase or if their temperature has fallen below 55°C.
If one of the STOP/continuous coffee" (C) keys is pressed,
coffee will be served at the temperature reached at that
moment.
All of the other keys are disabled because the working pressure
has not been reached.
While waiting for the machine to be ready for use, insert the
filter holders in the units.
The machine has reached the set work pressure and
temperature when the icon
Press a coffee selection key for each keypad to adjust the
temperature between the group and filter holder.
12 35
8
38 EN
English
15:15
90.4°C 91.6°C
disappears from the display.
12
English