Technical Specifications; Accessories - GGP ITALY HTJ 550 Manuel D'utilisation

12
IDENTIFICATION OF FAULTS / TECHNICAL SPECIFICATIONS / ACCESSORIES
EN
8. IDENTIFICATION OF FAULTS
PROBLEM
1) The engine – Incorrect starting procedure
will not start
or will not – Dirty spark plug or incorrect distance
keep running
– Air filter clogged
– Carburation problems
2) The engine starts – Air filter clogged
but is lacking
in power – Carburation problems
3) The engine runs – Dirty spark plug or incorrect
irregularly and lacks
in power when – Carburation problems
revved
4) The engine gives – Incorrect composition
off an excessive
amount of smoke – Carburation problems

9. TECHNICAL SPECIFICATIONS

MODEL
Capacity
Power
Spark plug
Petrol : Oil ratio
Tank capacity
Trimming length
Weight
Measured sound pressure level at ear's operator
- Measurement uncertainty
Measured sound power level
- Measurement uncertainty
Guaranteed acoustic power level
Vibrations level
- Measurement uncertainty

10. ACCESSORIES

Only cutting tools with the following codes must be
used on this machine:
23305004/0
All manuals and user guides at all-guides.com
LIKELY CAUSE
between the electrodes
distance between the electrodes
of the fuel mix
SOLUTION
– Follow the instructions
(see chap. 5)
– Check the spark plug
(see chap. 7)
– Clean and/or replace the filter
(see chap. 7)
– Contact your Retailer
– Clean and/or replace the filter
(see chap. 7)
– Contact your Retailer
– Check the spark plug
(see chap. 7)
– Contact your Retailer
– Prepare the fuel mix according to
the instructions (see chap. 4)
– Contact your Retailer
Given the product evolution, the above mentio-
ned tools may be replaced in time by others, with
similar interchangeable and operating safety cha-
racteristics.
HTJ 550
cm 24,5
3
kW 0,85
BOSCH L8RTF
50 : 1
liters 0,33
mm 550
kg 5,5
dB(A) 94,7
dB(A) 3,0
dB(A) 106,6
dB(A) 3,0
dB(A) 110
m/s 2,97
2
m/s 1,5
2