Installation - JUKI MO-6804D Manuel D'utilisation

3. INSTALLATION

WARNING :
• The sewing machine weighs 27 kg. The installation should be carried out by two or more people.
• Do not connect the power cord until installation is complete. The machine may operate if the treadle
is depressed by mistake, which could result in injury.
• Use both hands to hold the machine head when tilting it back or returning it to its original position. If
only using one hand, the weight of the machine head may be too heavy to hold, and may cause human
physical injuries.
• To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
❶
❹
❸
❷
中国缝纫机设备网
After unpacking, do not carry the sewing
machine holding the lower section of cloth
plate cover ❶.
1) Install, air-blower case ❸ and rubber cushion ❹
to frame support plate ❷, referring to the table
drawing and parts list.
– 3 –
www.fengrenjicn.com