Table Des Matières; General Information; Te 70-Atc/Avr And Te 80-Atc/Avr; Te 70-Atc/Avr Y Te 80-Atc/Avr - Hilti TE 70-D/AVR Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
TE 70 / TE 70-D / TE 70-ATC/-AVR / TE 80 / TE 80-ATC/-AVR
combihammer
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents
1 General information
2 Description
3 Insert tools, accessories
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
All manuals and user guides at all-guides.com
In these operating instructions, the designation "the
power tool" always refers to the TE 70-D/AVR rotary ham-
mer or TE 70-AVR, TE 70-ATC/AVR or TE 80-ATC/AVR
combihammer.
TE 70-ATC/AVR and TE 80-ATC/AVR 1
@
;
=
%
&
Page
1
(
2
)
4
+
4
§
5
/
7
:
7
9
TE 70-D/AVR and TE 70/AVR 2
10
11
11
@
;
=
%
(
)
+
§
/
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
Warning signs
General
warning
Function selector switch
Control switch lock
Control switch
Supply cord
Button for 50% power reduction (only ATC combi-
hammers)
Side handle
Chuck
Dust shield
Insert tool unlocking device
Service indicator
Reduced-power indicator (only ATC combiham-
mers)
Function selector switch (only combihammers)
Control switch lock (only combihammers)
Control switch
Supply cord
Side handle
Chuck
Dust shield
Insert tool unlocking device
Service indicator
information
Warning: Warning: hot
electricity
en
surface
1