After Using The Appliance - Siemens VSZ1 Serie Mode D'emploi

Controlling the suction level
8
Figure
Set the suction level by turning the On/Off button in
the direction of the arrow.
The suction level can be infinitely adjusted to the level
required by turning the control knob in the direction
of the arrow.
Low power range
For vacuuming delicate materials, e.g. delicate
upholstery, curtains, etc.
Medium power range
For daily vacuuming of lightly soiled floors.
High power range
For vacuuming durable floor coverings, hard floors
and heavily soiled floors.
Vacuuming
9
Figure
Adjusting the floor tool:
Rugs and carpets
Hard floors
Please note:
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have (e.g.
rough, rustic tiles). You must therefore check the
underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp
edges that can damage delicate hard floors, such
as parquet or linoleum. The manufacturer does not
accept any responsibility for damage caused by
worn floor tools.
10*
Figure Vacuuming with accessories
Attach the nozzles to the suction pipe or handle as
required:
a) Crevice nozzle for vacuuming crevices and corners,
etc.
b) Upholstery nozzle for vacuuming upholstered furni-
ture, curtains, etc.
c) Hard-floor nozzle
- with clip-in edge cleaning bristles:
For gentle but effective cleaning of hard floor
coverings (tiles, parquet, etc.)
- without edge cleaning bristles:
For cleaning dirt in gaps and cracks
The edge cleaning bristles can be removed by
pushing the two catches in the direction of the
arrows.
11
Figure
You can use the parking aid on the side of the appli-
ance if you wish to stop vacuuming for a short time.
After switching off the appliance, slide the hook
on the floor tool into the recess on the side of the
appliance.
12
Figure
When vacuuming on stairs for example, the appliance
can also be carried by the handle.

After using the appliance

13
Figure
Pull out the mains plug.
Briefly pull on the power cord and then release it
(the power cord retracts automatically).
=>
14
Figure
To store/transport the appliance, you can use the
=>
storage aid on the underside of the appliance.
Stand the appliance up on its end. Slide the hook on
the floor tool into the recess on the underside of the
=>
appliance.
You have purchased a floor vacuum cleaner which can
vacuum up any type of dry dirt using the dust contai-
ner or dust bag.
We recommend that you use:
− The dust bag principally for everyday household
cleaning.
=>
− The dust container for DIY-related cleaning in parti-
=>
cular, e.g. to vacuum up wood shavings, etc.
Using dust bags
Replacing the dust bag
15
Figure
If the dust bag change indicator in the lid is filled
completely when the floor tool is lifted from the
floor with the highest suction level selected, the
dust bag must be changed, even though it may not
yet be full. Even if the dust bag is not full, it may
still need changing, due to the type of dust which
has been vacuumed.
First check that the nozzle, suction pipe and flexib-
le hose are not blocked, as this would also lead to
the dust bag change indicator being triggered.
16
Figure
Unlock the lid by releasing the locking lever in the
direction of the arrow.
17
Figure
a) Close the dust bag by pulling on the locking tab and
then remove it.
b) Insert a new dust bag by pushing it fully into the
holder.
!
Please note: The lid will only close if a dust bag
has been inserted.
* Depending on model
29