Xylem JABSCO ParMax 1 Plus Manuel page 14

4
3
2
1
14
Tube to faucet fitting detail:
1. 1/4" Tubing (cut to length from pump
outlet - Step 1)
2. 1/4" Brass compression nut (fit onto
outside of tube - Step 2)
3. 1/4" Plastic ferrule (side onto outside
fo tube end - Step 3)
4. 1/4" Tube insert (insert fully into
tube - Step 4)
5. Step 5 - Fit assembly into faucet
stem and tighten compression nut
to snug fit, do not over tighten. After,
pressurizing system and check
for leaks.