Aquatec Sorrento Manuel D'utilisation page 4

Aquatec® Sorrento
1. Remove safety clips A from all four legs, see Fig 8.
2. Adjust the height B of the legs, see Fig 8.
3. Re-insert safety clips A on all four legs see Fig 8.
WARNING!
Risk of falling!
– Ensure that all legs are adjusted to the same
height, see Fig 10.
Fitting the armrests (option)
1. Drop armrests A into seat plate B on both sides, see
Fig 5.
WARNING!
Risk of injury!
– Ensure that both catches C in each armrest
audibly engage on the underside of the seat
plate, see Fig 5.
CAUTION!
Risk of entrapment!
– Do not grab the chair at the underside of the
seat at the armrest fixation.
– Do not put your fingers in open holes at the
armrest and below the seat.
Fitting the backrest (option)
1. Push backrest frame A into the rear openings of seat
plate B on both sides, see Fig 6.
WARNING!
Risk of injury!
– Ensure that both catches C of the backrest
frame audibly engage on the underside of the
seat plate, see Fig 6.
2. Pull down backrest cover A over both sides of the
backrest frame, see Fig 7.
WARNING!
Risk of injury!
– Ensure that the ends of the backrest frame are
properly located in the recesses D on the right
and left of the backrest cover, see Fig 7.
3. Close the backrest bands by pushing latches C into
buckles B, see Fig 7.
WARNING!
Risk of injury!
– Make sure that all buckles are securely closed.
4. Tighten the backrest bands, see Fig 9.
Tighten or slacken the bands to adjust the firmness
of the backrest cover.
The chair is disassembled in reverse order to assembly.
Maintenance and periodic inspection
The product is maintenance-free, provided that the cleaning
and safety instructions outlined in this user manual are
adhered to.
WARNING!
– Before first use, clean the product thoroughly.
– Before every use, check the product for damage
and ensure that it is securely assembled. Make
sure that all screws are securely tightened.
– Regularly clean and disinfect the product.
4
All manuals and user guides at all-guides.com
Cleaning and disinfection
The product can be cleaned and disinfected using
commercially available agents.
1. Clean the product regularly.
2. Disinfect the product by wiping down all generally
accessible surfaces with disinfectant (after disassembling
the product, if possible).
IMPORTANT!
All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to clean.
For further information on decontamination in
Health Care Environments, please refer to 'The
National Institute for Clinical Excellence' guidelines
on Infection Control www.nice.org.uk/CG139 and
your local infection control policy.
– Clean by hand.
– Do not use any aggressive (pH value under 4.5
or over 8.5) or abrasive cleaning agents.
– Max. cleaning temperature 85 °C for 3 minutes
in an autoclave.
Cleaning the backrest cover (option)
1. Remove the backrest cover.
2. Wash the cover in a washing machine at max. 60 °C
using a mild detergent.
IMPORTANT!
Risk of damage!
– Washing at higher temperatures can cause
shrinkage.
– Do not dry covers in a tumble dryer.
Re-use
The product is suitable for repeated use. The number of
times it can be used depends on how often and in which
way the product is used. Before reuse, clean and disinfect
the product thoroughly
(→ Cleaning and disinfection, page 4 ), check the product for
damages and ensure a proper mounting.
Disposal
The disposal and recycling of used devices and packaging
must comply with the applicable local legal regulations.
Materials (Fig. 11)
AL
A
PP
B
Allgemein
Wichtiger Hinweis:
Dieses Handbuch MUSS dem Benutzer des Produkts
übergeben werden. VOR der ersten Verwendung dieses
Produkts muss dieses Handbuch sorgfältig durchgelesen
werden. Bewahren Sie dieses Handbuch für später auf.
Diese Gebrauchsanweisung enthält wichtige Informationen
zur Verwendung des Produkts. Lesen Sie die
Gebrauchsanweisung sorgfältig durch und beachten Sie die
Sicherheitsinformationen, damit eine sichere Verwendung
des Produkts gewährleistet ist.
PP
C
D Nylon/PVC coated
IdeI
1528666-C