Meister MFS320-1 Traduction Du Manuel D'utilisation Original page 38

5456230-Schwingsch_man 30.01.15 09:08 Seite 38
use dust protection masks and
extraction systems.
• If you wish to use the device
outdoors, ensure it is connected via a
residual current circuit breaker.
Extension cable and plug must be
designated for use outdoors.
• Only use for dry sanding work.
• Breathing in dust from sanding is a
health risk, therefore always work
with the dust extraction function
activated. If necessary, use a mask.
• Only attach accessories with hook and
eye coatings to the sanding plate.
• The dust extraction openings of the
sand paper and the sanding plate
must match, as far as possible.
• When sanding, do not put excessive
pressure on the machine in order to
prevent the machine from coming to a
standstill.
• Secure the work piece to prevent it
from slipping by using tensioning
mechanisms.
• Make sure that cables always lead
away from the work place.
• During operation, always guide the
device with both hands and ensure
that you are standing firmly.
• The device should never be allowed
to get wet and should not be
operated in a damp environment.
• Prior to each use, check the device,
the cable and the plug. Any damages
should only be repaired by a specialist.
Only plug the device into the socket
38
when the machine is switched off.
All manuals and user guides at all-guides.com
• When carrying out work in which dust
is generated, wear a face mask and
safety goggles - do not smoke and
avoid naked flames.
• Use protective gloves
• Wear ear-protectors.
• Wear safety goggles.
• Before carrying out any work on the
machine, pull the plug out of the socket.
• Do not leave keys in the machine.
• Observe the general safety notes for
handling electrical tools.
• Switch the device off and pull the plug
out of the socket if the connection
cable is damaged. A damaged cable
must be replaced by the manufacturer
or by their customer service or a
similarly qualified person.
Type plate
Observe the technical specifications
detailed on the type plate! The
specifications have the following
meanings:
MFS320-1 Model designation
5456230 Article number
.