Reely Sky Roller Notice D'emploi page 46

Nod trimming:
If the quadrocopter tries to drift forward, reduce the speed until the quadrocopter is safely on its landing struts again.
Push the bottom trim button for the nod function several times (also see figure 1, item 3).
Push the pitch stick carefully forward and check if the adjustment was sufficient. Repeat the procedure until the model
does not show any tendency to drift to the front.
If the quadrocopter drifts to the rear, push the upper trim button for the nod function.
Every time the button is pushed, the trim is adjusted by one step and the adjustment is confirmed with a
brief signal. If the button is pushed and held, the transmitter will emit a quick sequence of signals to indicate
graduals adjustment of the trim. When the final position of the trim is reached, the transmitter no longer emits
any sounds.
Up to 50 trim steps are available in either direction. The trim middle setting is indicated by a longer signal
sound.
46
All manuals and user guides at all-guides.com
Figure 13