Flip Function - Reely Sky Roller Notice D'emploi

12.

Flip Function

The quadrocopter is able to fly flips as well if desired. The first flips should be flown outdoors on a wind-still day. For
this, first let the quadrocopter rise to a safety height of approx, 5 - 6 m and then let it hover.
Push the button for the flip function at the transmitter
(also see figure 1, item 4).
The transmitter switches to flip mode and emits signal
sounds in a dual rhythm with brief interruptions.
Move the control lever for the nod and roll function into
the direction in which the quadrocopter is to flip quickly
to the stop and then return the control lever to he midd-
le position without delay.
The quadrocopter will perform the flip in the desired di-
rection and the transmitter will then end flip mode.
For another flip, you need to push the flip function push-
button again.
Attention!
If you do not return the control stick to the middle position fast enough, the quadrocopter may perform two
flips and lose lots of height.
48
All manuals and user guides at all-guides.com
Figure 15