LaserLiner WoodTester Mode D'emploi page 13

Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Technical data
Measured variable
Mode
Measuring range Wood group A
Measuring range Wood group B
Accuracy
Power supply
Operating time
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight
EU directives and disposal
This device complies with all necessary standards for
the free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European Directive
on waste electrical and electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
(Technical revisions reserved. Rev21W26)
Resistive material moisture
measurement by way of
integrated electrodes
Wood (2 groups)
9% ... 24%
11% ... 28%
± 2%
1 x 6LR61 9V
approx. 40 hours
0°C ... 40°C, max. humidity 85% rH,
no condensation, max. working altitude
2000 m above sea level
-10°C ... 70°C, max. humidity 85% rH
58 x 120 x 30 mm
140 g (incl. batteries)
WoodTester
13
EN