Meister MAS16xM Traduction Du Manuel D'utilisation Original page 97

5451240-Akkubohrsc_man 27.02.15 10:31 Seite 97
• No memory effect, i.e. the rechargeable battery can be charged at any time,
either before or after use, regardless of the charge status without loss of
capacity.
• Extremely low self-discharge, thus it can be used even after a longer period
of storage.
• Low weight
• Long lifetime
Removing the rechargeable battery (Figure 2)
Press the battery unlock button (8) and pull the battery pack (7) out battery
holder (9).
Inserting the battery pack (Figure 2)
Slide the rechargeable battery (7) as far as it will go into the battery holder (9)
and allow it to click into place.
Charging the battery pack (Figure 3)
CAUTION! The rechargeable battery is not
completely charged when it leaves the factory.
Charge the battery pack before using for the first
time.
CAUTION! Only use the supplied charger to charge
the rechargeable battery (12).
CAUTION! Check the voltage specifications of the
charger (12) with the voltage of your mains power
supply before plugging the charger in.
1. Plug the charger (12) into the socket (Figure 3). The charging status check
light (14) on the charger (12) lights up in green and signals when ready to
operate.
2. Slide the rechargeable battery through the charging cradle (13) over the
contacts of the charger (12) until it clicks audibly into place. During the
charging process, the charging status check light (14) on the charger turns to
red.
All manuals and user guides at all-guides.com
97