Technical Characteristics; Technical Specifications; Safety Devices - IBEA VISIO N Notice D'emploi Et D'entretien

5.1

TECHNICAL SPECIFICATIONS

GB
GB
Dimensions (L X W X H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2450 x 1079 x 1350
Cutting width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 cm
Cutting height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .min 33 mm max 83 mm
Maximum forward speed . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxxxxx
Maximum reverse speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxxxx
Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B&S 15.5 HP/IC
Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .hydrostatic
Collector capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240 liters
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9.5 liters
Turning circle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .min 0,15 m
Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 steering wheels
Tyres: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Front 18x8,5-8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Rear 18x5,0-6
Tyre pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .front and rear wheels 0,9 bar
Deck castor wheels pressure . . . . . . . . . . . . . . . . . . . . . . . . . .1,0 bar
Weight of the tractor -i.e. with fuel and deck assy . . . . . . . . . .276 kg (complete with fuel)
5.2

SAFETY DEVICES

The figure 5.2 shows the locations of safety micro-switches
that stop the tractor functioning; in the event that normal safety
requirements are not set correctly.
A) Driver presence micro-switch
B) Forward pedal micro-switch
C) Blade engagement micro-switch
D) Collector position micro-switch
E) Lowered seat micro-switch
All manuals and user guides at all-guides.com
5

- TECHNICAL CHARACTERISTICS

The lawn tractor will only function when operator is correctly
seated on the tractor.
The operator can leave the mower with engine running, only
if blades are not engaged, the traction is idling and the seat
is down.
If you attempt to engage the blades and/or PTO from off the
tractor, the tractor will stop.
Another micro-switch checks the correct position of the
collector. The engine will not run if you attempt to open
collector when the blades are rotating and the grass discharge
fan is engaged.
24