Dürkopp Adler 745-35-10 S Manuel D'utilisation page 75

Programmation
Manuel d'utilisation 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Élément de menu
5.1.13.6 Breast welt mode On/Off (745-35-10 A uniquement)
5.1.16 Select pedal mode
5.1.15 Stacker/smoother/blow-off/roll-off
5.1.15.0 Select clamping time
5.1.15.3 Set lift transport clamp after corner cut
5.1.15.7 Set roll-off time (745-35-10 A uniquement)
5.1.15.8 Set roll-off speed (745-35-10 A uniquement)
5.1.15.6 Set time after roll-off until lift-up (745-35-10 A uniquement)  p. 136
5.1.15.5 Set roll-off time after corner cut (745-35-10 A uniquement)  p. 136
Tape trimming On/Off (745-35-10 A uniquement)
5.2 Global parameters
5.2.1 Set positioning point seam begin./center/end
5.2.2 Adjust transport clamp
5.2.5 Adjust corner knife distance (745-35-10 S uniquement)
5.2.7 Maximum hook thread counter
5.2.8 Hook thread monitor On/Off
5.2.10 Transport clamp quick adjustment
5.2.18 Set password protection
5.2.19 Set counting direction of piece counter
6.0 DAC internal
DA uniquement
7.0 DAC update
8.0 USB data transfer
8.1 Data transfer to USB
8.2 Data transfer from USB
9.0 Init. parameters
Initialize machine configuration
Initialize global parameters
Initialize all seam programs
Option/
Description page
 p. 73
 p. 134
 p. 135
 p. 135
 p. 135
 p. 136
 p. 136
 p. 96
 p. 147
 p. 149
 p. 158
 p. 148
 p. 148
 p. 148
 p. 148
 p. 148
Pour les collaborateurs
 p. 170
 p. 186
 p. 188
 p. 190
 p. 190
 p. 190
73