Sunbeam 5735-33 Mode D'emploi page 5

B R E W I N G C O F F E E L A T E R
1. You must first set the time for when you would like the coffeemaker to begin brewing your
coffee as described in "Setting the Clock and the Delay Brew Timer" section.
2. Prepare your coffeemaker as described in "Adding Water and Ground Coffee" section.
3. To activate DELAY BREW and program your coffeemaker to brew coffee at a later time, press
the PROGRAM button. The AUTO indicator light will illuminate. The coffeemaker is now set to
automatically brew coffee at the pre-set later time.
4. At the pre-set time, the red indicator light will turn on and the Auto indicator will turn off,
indicating the brewing has started.
5. The coffeemaker warming plate will keep your coffee hot for 2 hours and then will
automatically turn off.
As a safety feature, your coffeemaker will NOT start again automatically the
next day. If you want your coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set DELAY BREW, by repeating Steps
2 and 3 above.
To cancel DELAY BREW: Press the AUTO button. The DELAY BREW red indicator light will
turn off.
C L E A N I N G A N D M A I N T A I N I N G
Y O U R C O F F E E M A K E R
Daily Cleaning
Always unplug the coffeemaker and allow to cool before cleaning.
Remove the filter basket, permanent filter (not included on all models), decanter and decanter lid
and wash them in a solution of hot water and mild liquid soap.
Never use abrasive cleansers, steel wool pads or other abrasive materials. Dishwasher top rack
safe parts: glass decanter and lid, filter basket and permanent filter.
!
CAUTION! Never immerse the coffeemaker itself in water,
in any other liquid or place in the dishwasher.
Regular Cleaning and Maintenance
Decalcifying your SUNBEAM ® Coffeemaker
Minerals (calcium) found in water will leave deposits in your coffeemaker and will affect it. It's
recommended that you regularly remove these deposits by using vinegar.
1. Pour 4 cups or 20 fl. oz. of undiluted, white household vinegar into the water reservoir.
2. Place an empty 10-12 cup basket-style paper filter or permanent filter into the filter basket and
close reservoir lid.
8
All manuals and user guides at all-guides.com
T R O U B L E S H O O T I N G Y O U R C O F F E E M A K E R
Your SUNBEAM Coffeemaker has been carefully designed to give you many years of trouble-
®
free service. In the unlikely event that your new coffeemaker does not operate satisfactorily,
please review the following potential problems and try the steps recommended BEFORE you
call an Authorized Sunbeam Service Center.
PROBLEM POSSIBLE CAUSE
THE ON LIGHT The appliance is unplugged.
DOES NOT LIGHT UP
There's a power outage.
THE COFFEE IS The appliance is unplugged.
NOT BREWING
There's a power outage.
The water reservoir is empty.
The filter basket is not
properly inserted.
The decanter is not placed all the
way in on the warming plate.
THE COFFEEMAKER There are no coffee grounds in
ONLY BREWS WATER the filter basket.
THE COFFEEMAKER The coffeemaker needs cleaning.
BREWS SLOWLY
THE FILTER BASKET The filter basket is not
OVERFLOWS properly inserted.
The decanter is not placed
all the way in on the warming plate.
The decanter lid is not on decanter.
Too many coffee grounds were
placed in the filter.
The decanter was removed from
the warming plate for more than
30 seconds.
THE COFFEE IS There's a power outage.
NOT HOT
Auto SHUT-OFF has been activated.
THE COFFEE Coffee grounds other than for an
TASTES BAD automatic drip coffeemaker were
used.
The ground coffee-to-water ratio
was unbalanced.
The coffeemaker needs cleaning.
THE GROUNDS ARE The filter is not properly seated
IN THE COFFEE in the basket.
The filter collapsed.
Do you still have questions? You can call us toll-free at the SUNBEAM
1-800-667-8623 or you can visit us at www.sunbeam.com.
SOLUTION
PLUG UNIT IN.
WAIT FOR POWER TO BE RESTORED.
PLUG UNIT IN.
WAIT FOR POWER TO BE RESTORED.
CHECK THE WATER LEVEL.
INSERT FILTER BASKET CORRECTLY.
PLACE DECANTER CORRECTLY ON
WARMING PLATE.
ADD THE DESIRED AMOUNT
OF COFFEE.
CLEAN COFFEEMAKER AS
DESCRIBED IN "CLEANING
AND MAINTAINING" SECTION.
INSERT FILTER BASKET CORRECTLY.
PLACE DECANTER CORRECTLY
ON WARMING PLATE.
PLACE LID ON THE DECANTER.
REMOVE FILTER, DISCARD GROUNDS.
IF PAPER FILTER, REPLACE.
IF PERMANENT FILTER, RINSE.
BEGIN BREWING PROCESS AGAIN.
TURN OFF AND UNPLUG THE UNIT.
ALLOW TO COOL. WIPE UP THE
SPILL. DO NOT SET HOT DECANTER
BACK ON ON THE WET WARMING
PLATE OR IT MIGHT CRACK.
WAIT FOR POWER TO BE RESTORED.
FOR BEST RESULTS, BREW A FRESH
POT OF COFFEE.
USE COFFEE GRIND RECOMMENDED
FOR AUTOMATIC DRIP
COFFEEMAKERS.
USE CORRECT GROUND
COFFEE-TO-WATER RATIO.
CLEAN COFFEEMAKER AS
DESCRIBED
IN "CLEANING AND MAINTAINING
YOUR COFFEEMAKER" SECTION.
SEAT FILTER PROPERLY WITHIN
THE FILTER BASKET.
REMOVE FILTER AND REPLACE.
Consumer Service Department,
®
9