Kärcher 250 Manuel D'utilisation page 2

ENGLISH
Unit diagram
1 Battery cover (not shown)
2 Carrying handle
3 Switch – spraying and vacuuming
4 Indicator lamp
5 Fresh-water tank
5a Cap – fresh-water tank
6 Dirty-water tank
6a Locking button – dirty-water tank
7 Threaded connection hose to unit
8 Plug-and-socket connection
hose to cleaning head
9 Shoulder strap
9a Fastening point for shoulder strap
10 Fastening point for waist belt
11 Spray button
12 Charger (not shown)
13 Cleaning head
13a Slider – cover
13b Rubber blade
13c Felt strip
1. Preparing the unit for use
Applications
• Cleaning of windows, tiles or smooth surfaces (e.g.
mirrors, kitchen cabinets, shower surrounds) with the
cleaning head.
! Information about the battery
• The Window Washer should only be used with the lead
gel battery that has been supplied with the unit. Use
only the supplied charger to charge this battery.
• The battery should never be allowed to become fully
discharged, so charge it as soon as the indicator lamp
on the unit illuminates continuously or if there is a
marked reduction in performance (demonstrated by a
drop in the noise level and poor vacuuming results).
• We recommend that the battery is recharged overnight
after each use of the unit. Overcharging cannot happen
when doing so.
• If the unit is to remain unused for a lengthy period of
time, store the unit only with fully charged battery.
• See Chapter 3 for technical specifications relating to
the battery and charger.
All manuals and user guides at all-guides.com
Charging the battery
• Open the cover at the rear of the unit and insert the
Do not insert any conductive objects (e.g.
screwdriver, etc.) into the charging socket.
2
battery in such a way that the battery contacts make
contact with those of the unit. Close the cover again.
(Fig. A, B)
! Risk of short-circuit! Risk of short-circuit! Risk of short-circuit!
Risk of short-circuit! Risk of short-circuit!
Window Washer