HoMedics BPA-750-CA Manuel D'instruction Et Information Sur La Garantie page 38

Recommended separation distances between portable and mobile RF
communication equipment and the device.
The device is intended for use in an electromagnetic environment where radiated
RF disturbances are under control. User can help prevent electromagnetic interfer-
ence by keeping the device at a minimum distance from portable and mobile RF
communications equipment (transmitters). Below table details the maximum output
power of transmitter:
For transmitters rated at a maximum output power not listed above,
the recommended separation distance d in metres (m) can be estimated using
the equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propaga-
tion is affected by absorption and reflection from structures, objects and people.
15-0148 BPA-750-CA IM_v3--02.indd 37
Rated maximum
output power
of transmitter
150 kHz to 80 MHz
W
0.01 0.12
0.1 0.38
1 1.2
10 3.8
100 12
Separation distance according to frequency of transmitter
80 MHz to 800 MHz
d = 1.2 √P d = 1.2 √P
0.12
0.38
1.2
3.8
12
37
m
800 MHz to 2.5 GHz
d = 2.3 √P
0.23
0.73
2.3
7.3
23
2015/10/28 下午5:44