HoMedics BPA-750-CA Manuel D'instruction Et Information Sur La Garantie page 17

1. If the cuff is not assembled, pass the end of the
cuff furthest away from the tubing through the
metal D-ring in order to form a loop. The smooth
side without the felt material should be on the
inside of the cuff loop.
2. Plug the cuff tube into the left side of the unit.
15-0148 BPA-750-CA IM_v3--02.indd 16
End of cuff
D-ring
Insert plug here
16
2015/10/28 下午5:44