3. Open the arm cuff so that your arm may
be placed through it.
4. Remove tight fitting clothing from your
upper left arm so that the cuff can be
wrapped around your exposed arm.
5. Position cuff edge 0.8-1.2
inches (2-3 cm) above elbow.
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between the
cuff and your arm.
8. Lay your arm on a table (palm upward)
so the cuff is at the same height as your
heart. Make sure the tube is not kinked.
15-0148 BPA-750-CA IM_v3--02.indd 17
17
2015/10/28 下午5:44