HoMedics BPA-750-CA Manuel D'instruction Et Information Sur La Garantie page 22

4. After all symbols disappear, the display
will show "00". The monitor is "Ready to
Measure" and will automatically inflate
the cuff to begin measurement. The
cuff will start deflating as measurement
continues.
Note:
This monitor will re-inflate automatically if the system
detects that your body requires more pressure for
measurement.
5. When the measurement is completed, the
cuff will deflate entirely. Systolic pressure,
diastolic pressure and pulse will be shown
simultaneously on the LCD screen. The
measurement is then automatically
stored into memory.
Note:
• This monitor automatically returns to standby mode
approximately 30 seconds after last operation. You may also
press the START/STOP button to return to standby mode.
• To interrupt the measurement, you may press the START/
STOP (recommended), MEM, User- Select or Date/Time
Set (
button is pressed.
15-0148 BPA-750-CA IM_v3--02.indd 21
) buttons. The cuff will deflate immediately after a
SYS.
mmHg
DIA.
mmHg
TALKING
LANGUAGE
MODE
21
TALKING
MODE
2015/10/28 下午5:44