Hahnel MODUS 600RT MKII Mode D'emploi page 40

Number of
flashes that will
activate over-
temperature
protection:
Number of flashes that will
activate over-temperature
protection in high-speed sync
triggering mode:
2. Other Protections
The system provides real-time protection to secure the device and your
safety. The following lists prompts for your reference:
Prompts on
LCD Panel
E1
E2
E3
E9
40
Power Output level
1/1
1/2 +0.7
1/2 +0.3
1/2
1/4(+0.3,+07)
1/8(+0.3,+07)
1/16(+0.3,+07)
1/32(+0.3,+07)
1/64(+0.3,+07)
1/128(+0.3,+07)
Meaning
A failure occurs on the recycling system so that
the flash cannot fire
Please restart the flash unit. If the problem
still exists, please send this product to a
maintenance center
The system gets excessive heat. Please allow
a rest time of 10 minutes
The voltage on two outlets of the flash tube
is too high. Please send this product to a
maintenance center
There are some errors occurred during the
upgrading process. Please use the correct
firmware upgrade method
Power Output
1/1
1/2(+0.3,+07)
1/4(+0.3,+07)
1/8(+0.3,+07)
1/16(+0.3,+07)
1/32(+0.3,+07)
1/64(+0.3,+07)
1/128(+0.3,+07)
Number
of Flashes
30
40
50
60
100
200
300
500
1000
Times
15
20
30
40
50
Modus 600RT - English