Feb: Flash Exposure Bracketing - Hahnel MODUS 600RT MKII Mode D'emploi

FEB: Flash Exposure Bracketing

You can take three shots while automatically changing the flash output
for each shot. The camera will record three images with different
exposures: one exposed according to camera calculations, one
over-exposed and another under exposed. Over and under exposure
amount is user adjustable from -3 to +3. This function helps get correct
exposure especially in shooting moving objects or when environmental
lights are complex.
• FEB will be cancelled after three photos are taken. For best results,
set the camera drive mode to "single" and ensure the flash is ready
before shooting.
FEB can be used with FEC and FEL.
•
You can prevent the FEB from being cancelled automatically after
three photos are taken. (C.Fn-FEB ACL, Page 46)
The FEB shooting sequence can be changed. (C.Fn-FEB, Page 46)
FEL: Flash Exposure Lock
FEL can lock the correct flash exposure setting for any part of the
scene. With <ETTL> displayed on the LCD panel, press the camera's
<FEL> button. Check your camera manual for details of how to activate
<FEL> on your camera.
Modus 600RT - English
SET
SET
3. Press < SET > button again
to confirm the setting.
1. Press function button 3 <
>. The icon <
and the exposure bracketing
amount will be highlighted on
the LCD panel
2. Set the flash exposure
compensation amount.
• Turn the Select Dial to set
the amount.
• "0.3"means 1/3 step,
"0.7"means 2/3 step.
3. Press < SET > button again
to confirm the setting. Then
your FEC and FEB settings are
displayed on the LCD panel.
1. Focus the subject.
2. Press the <FEL> button
• Aim the centre of the view
finder at the required part of
the scene and press <FEL>
button
• The speedlight will fire a
preflash and the required
flash output for the subject is
>
17