How To Charge The Battery; Fitting And Removing The Battery; Battery Level Indication - Hahnel MODUS 600RT MKII Mode D'emploi

Caution
• Do not short circuit the battery
• Do not drop battery into water or fire
• Do not drop or dismantle or subject the batteries to strong impact or
continuous mechanical shock
• Stop using the battery if the battery has any signs of damage or
bulging to housing and dispose of battery in accordance with the
appropriate local regulations

How to charge the battery

The HLX-MD1 battery must be charged before use. Use the supplied
MD1 MKII charger to charge the battery. Connect the MD1 MKII
charger to a USB adapter (min 5V 2 Amp) with the supplied Micro USB
Cable . To start the charge insert the HLX-MD1 battery into the MD1
MKII charger and the green LED bars will illuminate, indicating that the
battery is charging. 4 green LED's on indicates full charge. Remove the
battery from charger when fully charged.

Fitting and Removing the Battery

Battery Level Indication

Make sure the battery pack is securely fitted in the flash. Check the
battery level indication on the LCD panel to see the remaining battery
level.
Low Battery Warning
14
1. To fit the battery, push the
battery compartment cover
downward and open it.
2. According to the triangle sign
on the battery pack, insert it
into the compartment until a
white clip locks the battery
with a click sound.
3. To remove the battery, tap
the white clip and the battery
pack will pop out. Then close
the compartment.
Modus 600RT - English