Wireless Flash; Viper Ttl Group Mode Setting - Hahnel MODUS 600RT MKII Mode D'emploi

5
Wireless Settings
DCM (Digital Channel Matching)
1. DCM (Digital Channel Matching). Carry out the DCM matching,
see page 28
2. Set the Modus 600RT to 2.4GHz as Slave Unit - Group A,see
page 27
3. Press Viper <test>
triggered wirelessly

Viper TTL group Mode Setting

Press buttons
group to <TTL>, <M> manual & <blank> OFF.
Take a test photograph now and the Viper transmitter will send a
wireless signal to each Modus 600RT and to each 3rd Party Speedlight
connected to a Viper TTL receiver. The Speedlight will then be set
automatically to the same Viper TTL selected group mode setting.
• The Viper LCD
• A group is turned OFF if the LCD is not showing the group
• A group is in Manual mode when <M> is displayed next to the group
• A group is in TTL mode when <TTL> is displayed next to the group
• Each group
use simultaneously different setting for each group (e.g. Group
be in <M>, Group
Group Power Control setting for Manual and
TTL FEC
From the Viper TTL transmitter you can adjust the power level and the
FEC of each group.
4. Press <SEL>
<C> will flash.
5. Press one button
to adjust the power. Now only the selected group icon <A or B or
C> will flash
6. Use the adjust dial to set the power output in <
FEC in TTL mode
7. Press the <SEL> button to lock your selection
Multi Mode
Press and hold the < Group A > button to select the Multi mode <
•
> icon. Use the <SEL> button, Group Buttons and adjust dial
MT
to set the number of flashes, flash frenquency and power output.
Press the <SEL> button again to lock selection
• For more detail on operation of the viper TTL visit www.hahnel.ie
Modus 600RT - English
button to confirm that Modus Speedlight is
08
or or to change the MODE setting of each
A B C
05
will show the setting of each group
,
or
A B C
B
in <TTL> and Group
select button and all three icons <A>, <B> and
02
or
A B

Wireless Flash

Photography:
(2.4GHz) using
Viper TTL Transmitter
is set independently and it is possible to
C
turned OFF)
or to select which group you want
C
A
may
> mode and
M
35