Hahnel MODUS 600RT MKII Mode D'emploi page 31

Modus 600RT - English
2. Set the firing group of the
slave units
• Operate and set the slave
units one by one
• Press Function Button 3 <
to group <A>, <B>, <C>,<D>
or <E>
• Set the firing group (A/B/C/
D/E) for all the slave units
3. Set the flash mode
• Set the flash mode of each
firing group by operating the
master unit
• While <
displayed, press Function
Button 3 <
turn the Select Dial to choose
the group
• Press Function Button 2 <
flash mode of the selected
SET
group from <ETTL>, <M>
and <---( OFF )>
• Use Function Button 4 to
return to previous menu
• Repeat step 3 to set the flash
mode of all groups
4. Set the flash output and
flash exposure compensation
amount.
• While a firing group is
selected, press Function
Button 3 <
• Turn the Select Dial to
set the flash function
corresponding to flash mode,
and press <SET> Button to
confirm
• When using the <M> mode,
SET
set the flash output power
• When using the <ETTL>
mode, set the flash exposure
compensation amount as
required
• Repeat step 4 to set the flash
function of all groups
• Press Function Button 4 to
return to the shooting-ready
state
5. Take the picture
• Each slave unit fires in the
respective flash modes set.
> to assign the flash
Gr
MENU1
Gr
> and select the
MODE
> is
> and
>
31