Battery (Insertion And Change); Disconnection Of The Hearing Aid - Microson m4 ITC P ZERO Manuel De L'utilisateur

m4 ITC P DIR ZERO
1
2
4
5
6
m4 CIC P ZERO
5
4
1
7
2
8
1. Wax Filter
2. Venting
3. Button for changing programs*
4. Battery compartment
5. Microphone/s
6. Battery Size 312, IEC 60086: PR41 (Size original)
7. Extractor
8. Battery Size 10, IEC 60086: PR70 (Size original)
Side Indicator
Blue --> LEFT Side
Red --> RIGHT Side
*(Option for m4 ITC P DIR ZERO / m4 CIC P ZERO)
EN
m2 ITC ZERO
1
2
3
4
5
6
m2 CIC ZERO
5
4
1
7
2
8
18

BATTERY (INSERTION AND CHANGE)

1- Open the battery compartment.
2- Remove the battery protector and place
the new battery with the "+" symbol facing
upwards and close the battery compartment.
 If the battery is not inserted correctly, the
hearing aid will not work.
3- To remove the battery, turn the instrument
upside down and let the battery fall into your
hand.
i INFORMATION
• Remove the batteries if you will not use the
hearing aid for a prolonged period.
• Immediately replace weak batteries.
 Do not throw the batteries in the garbage!
Hand them in to a hearing health professional
so that the batteries are properly eliminated
without harming the environment.
REMEMBER THAT YOUR HEARING AID GIVES A WARNING OF 4 SOUND SIGNALS
TO INFORM YOU THAT THE BATTERY IS DEAD.

DISCONNECTION OF THE HEARING AID

SWITCH OFF:
To switch off your hearing aids, partially
open the batte r y c o m p a r t m e n t.
SWITCH OFF
SWITCH ON:
To switch on your hearing aid, close the
battery compartment.
SWITCH ON
19
EN