SOUNDMASTER SCD1900 Mode D'emploi page 12

To start random playback, repeatedly press the "Repeat" button until "RAND" appears in
4.
the display.
To resume normal playback, repeatedly press the "Repeat" button until the "Repeat" or
5.
"RAND" icon disappears in the display.
Program Play
You can use the program play feature to play up to 20 tracks on a disc in any desired order. You
may also program a particular track to play several times within a programmed sequence.
1. Load your disc as usual and wait until the display shows the total number of tracks on the
disc.
Ensue it is in CD stop mode, press the "Program" button once, the display will show "P 01".
2.
Press the ◀◀ or ▶▶ button to select the first track number to be programmed. When your
3.
desired track number appears in the display, press the "Program" button to confirm and the
first track to play is programmed. The program memory number will advance to "P 02" and
ready for the next entry.
If a MP3 disc is being loaded, press the "Preset +" or "Preset –" button to select folder.
4.
5. Repeat the above steps to program other tracks, a maximum number of 20 tracks (99 for
MP3) can be programmed. When you have completed programming, press the ▶II button to
begin program play, playback will be started on the first track that you have programmed
and will continue until the last programmed track has played.
6. When the program play is completed, the player stops and it will remain in the program play
mode as long as the "Program Play icon" is displayed. Press the ▶II button will play the
programmed sequence again.
To erase the program, press the ■ button once in CD stop mode; and press the ■ button
7.
twice during CD play, the "Program Play icon" will disappear in the display.
Repeat Program Play
You may use the program play and the repeat play features together to continuously repeat a
programmed playback. First program the desired playback sequence, then press the "Repeat"
button to select repeating the current track (Repeat One) or the entire programmed sequence
(Repeat All).
To select USB mode, repeatedly press the "Mode" button until "USb" is displayed.
1.
2. Insert your USB memory device into the USB port (located at the back of the unit), the
display will show the total track number and you can now start your USB/MP3 playback
operation.
To interrupt or start playback, press the ▶II button.
3.
To skip forward or back to other tracks during playback, press the ◀◀ or ▶▶ button.
4.
To select other folders, press the "Preset +" or "Preset –" button.
5.
To stop playback, press the ■ button.
6.
Repeat, Random and Program Play is the same as in CD-Mode.
SCD1900 / English Instruction Manual
USB
4