Configuration; Information Panel - GYS GYSPOT ARCPULL 200 Mode D'emploi

CONFIGURATION

Conf i gur at i on
> Pr egaz > 0. 2s
Post gaz 0. 2s
Langue FR
Reset m achi ne
I nf o
Range of settings
Pregas NoGas then from 0.2s to
3s
Postgas NoGas or from 0.2s to 3s
Language FR, GB, DE, NL, ES, IT, RU
Push the return button
Reset machine
Reset m achi ne
: 3sec
pour val i der

Information panel

I nf o m achi ne
Sof t géné V1. 0
Har d géné V2. 0
Sof t pi st ol et V1. 0
Har d pi st ol et V2. 0
26
GYSPOT ARCPULL 200
Press the keys G+ and G- to move the left cursor (Pregas, Postgas, Language, Reset
machine, Info).
When the items Pregas, Postgas or Language are highlighted, press the keys D+ and D-
to modify their value.
Comment
To weld using a gas coating, it is recommended to have a minimum pre-
gas setting of 0.2s with a flow rate between 10 and 12L/min.
To weld using a gas coating, it is recommended to have a minimum
postgas setting of 0.2s.
to return to the Main Menu
When the «Reset Machine» is selected from the Configuration menu, pressing menu/vali-
date opens the reset machine sub-menu.
Press menu/validate
Push the return button
The information panel provides information on software versions and hardware of the gene-
rator and gun (if it is connected).
for 3 seconds to confirm product reset.
to return to the Configuration menu and cancel product reset.
EN