Technical Specifications - Videx 6200 Serie Mode D'emploi

6200 Series
Art. 6286
3.5" colour display videophone
NOTE: WHEN USING CST2310 CONCIERGE
To enable calling to the concierge and receiving
calls from the concierge; on the master device (SW3
Dip 2&3 OFF), set dip switch 1 of SW2 to OFF and
also dip switch 4 of SW3 to ON. Intercommunication
is between devices in the same apartment.
CONNECTION TERMINALS SIGNALS
BUS1 Bus input
BUS2 Bus input
GND
Ground
+12Vdc power supply input (Art. 323/12 or
Art. AMR2-12) for version with Memory Board op-
+12VM
tion or auxiliary power supply input (to be used
when two or more slave monitors are ringing to-
gether with the switch 4 of SW3 is set to ON)
GND
Ground
+30Vdc power supply input (Art. 2321) to be
+VAUX
used when two or more slave monitors are ring-
ing together with the switch 4 of SW3 set to ON
Dry contact. Internally linked to NO
C
when the
Dry contact. Internally linked to C
NO
when the
–DOL
Auxiliary LED power supply input (ground)
+DOL Auxiliary LED power supply input (+12Vdc)
Ground output for use in combination with AL
AL-LB_GND
& LB active low inputs
LB
Local bell input (active low)
AL
Alarm input (not implemented yet)
Art. 6286 - Installation instructions
button is pressed.
Max 35Vdc,
50mA
button is pressed.

TECHNICAL SPECIFICATIONS

Housing and mounting: 6200 Series - Surface
ON
Push buttons:
1 2 3 4
Programming:
SW3
Controls:
Power consumption:
Working voltage:
MEMORY BOARD
This device is also available in the version with
memory board (Art. 6286/VM).
If you have that version, please refer to the
"6200, 6300, 6400 and 6700 Series Memory
Board" user manual for installation and use.
The manual is available for download:
click/tap or scan the QR code.
- 4 -
4
Through buttons and dip-switches
Call tone volume
Brightness
Colour intensity
Contrast
Stand-by: 1/3mA
Operating 150mA
Peak: 200mA
Supplied by the BUS line
66251130 - V4.8 - 15/05/22