Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
6200 Series
Art. 6286
3.5" colour display videophone
27 mm
Fig. 1 Front
DESCRIPTION
An intelligent Videophone using 3.5" full colour active matrix
LCD monitor for VX2300. Including 4 buttons "service", "privacy/
bus relay activation", "door-open/intercommunicating call" and
"camera recall" plus 3 LED's for visual indication of all functions.
Adjustments & programmable options: call tone volume on 3 lev-
els (low, medium, high), picture hue, brightness and contrast, call
tone melody, number of rings, privacy duration and address. Also
includes a local bell function. The Art. 6286 is surface mount.
PUSH BUTTONS
Service push button
When pressed it links internally the terminals C and NO on the connection terminals.
Privacy ON-OFF push button
To enable the function press this button when the videophone is in stand-by. The service is automatically disabled when
the programmed time expires (the privacy duration time can be programmed) or manually by pressing again the button.
Activate bus relay board Art. 2305 push button
To activate a bus relay, during a conversation, press this button quickly as many times as the address value of the relay.
Door open push button
Press this button to open the door when you are in conversation.
Intercommunication push button
For an intercommunicating call, pick up the handset and press as many times as the extension or address value to call (see
SW3 Intercommunication Settings).
Camera recall push button
Pick up the handset and press as many times as the DEVICE N. of the door station to switch on.
Camera switch push button
If the door station uses the Art. 4303N plus the Art. 4330N, pressing this button during a conversation switches the video
signal coming from the camera module to the video signal coming from the camera module input for external camera.
During the conversation, press and keep pressed the button until the camera switches. Repeat the operation to switch back
to main camera.
Art. 6286 - Installation instructions
144 mm
B
SW
C
D
Fig. 2 Back
LEGEND
Connection terminals
A
Bus termination switch
B
4 Way dip switch bank
C
8 Way dip switch bank
D
Contrast adjustment trimmer
E
Hue adjustment trimmer
F
Brightness control
G
Call tone volume switch
H
- 1 -
A
PT3 PT2
G
H
66251130 - V4.8 - 15/05/22
R01A
E
F
Publicité
Table des Matières
Manuels Connexes pour Videx 6200 Serie
Sommaire des Matières pour Videx 6200 Serie
- Page 1 6200 Series Art. 6286 3.5" colour display videophone R01A 27 mm 144 mm PT3 PT2 Fig. 1 Front Fig. 2 Back DESCRIPTION LEGEND An intelligent Videophone using 3.5” full colour active matrix Connection terminals LCD monitor for VX2300. Including 4 buttons “service”, “privacy/ Bus termination switch bus relay activation”, “door-open/intercommunicating call”...
- Page 2 6200 Series Art. 6286 3.5" colour display videophone LEDS CONTROLS Call tone volume control Privacy on LED (3 levels). It illuminates when the privacy service is enabled. Brightness control Generic use LED (sliding wheel). It is controlled from the terminals +DOL and –DOL. Nor- Colour intensity control trimmer mally used to signal the door status (open or closed).
- Page 3 6200 Series Art. 6286 3.5" colour display videophone VIDEOPHONE ADDRESS – SW1.1..7 The table below shows how to set the address of the videophone. Considering that ON = 1 and OFF = 0, multi- ply each digit for the relevant decimal weight then sum values obtained to get the address: E.g. as highlighted 1 2 3 4 5 6 7 in the table OFF, ON, OFF, OFF, ON, OFF, ON in binary is equal to 0100101 then multiplying each digit for the relevant decimal weight you obtain the address that is 37.
-
Page 4: Technical Specifications
6200 Series Art. 6286 3.5" colour display videophone NOTE: WHEN USING CST2310 CONCIERGE TECHNICAL SPECIFICATIONS To enable calling to the concierge and receiving Housing and mounting: 6200 Series - Surface calls from the concierge; on the master device (SW3 Push buttons: Dip 2&3 OFF), set dip switch 1 of SW2 to OFF and Programming: Through buttons and dip-switches... - Page 5 6200 Series 6200 Series Videophone wall mounting instructions Fig. 1 Fig. 2 Fig. 3 Fig. 5 Fig. 4 Fig. 6 Fig. 7 1. In order to install the videophone, it is necessary to remove the cover, which contains all the electronics, from the base: firstly disconnect the handset from the videophone (by removing its plug from the videophone) then insert a 5.5mm flat screw driv- er into the clip then rotate clockwise until you listen a “CLICK!”.
- Page 6 Serie 6200 Art. 6286 Videocitofono 3,5" a colori R01A 27 mm 144 mm PT3 PT2 Fig. 1 Fronte Fig. 2 Retro DESCRIZIONE LEGENDA Videocitofono a colori con monitor LCD TFT da 3,5” per siste- Morsettiera di connessione mi videocitofonici VX2300. Sono disponibili 4 pulsanti di cui 2 Switch di terminazione del BUS con funzioni multiple: “Servizio”, “privacy”, “apri-porta/chiamata Dip-switch ad 4 vie...
- Page 7 Serie 6200 Art. 6286 Videocitofono 3,5" a colori REGOLAZIONI Regolazione volume della nota di chiamata LED privacy on (3 livelli). Si illumina quando il servizio è attivo. Regolazione luminosità. LED ad uso generico È alimentato dai morsetti +DOL e –DOL della scheda di Trimmer di regolazione della saturazione connessione Art. 5980.
- Page 8 Serie 6200 Art. 6286 Videocitofono 3,5" a colori INDIRIZZO VIDEOCITOFONO – SW7..1.1 La tabella sottostante mostra come impostare l’indirizzo del videocitofono. Considerando che ON = 1 e OFF = 0, moltiplicare ciascuna cifra per il relativo peso decimale quindi sommare i valori ottenuti per 1 2 3 4 5 6 7 calcolare l’indirizzo: Es.
-
Page 9: Specifiche Tecniche
Serie 6200 Art. 6286 Videocitofono 3,5" a colori NOTA UTILIZZO CENTRALINO DI PORTINERIA SPECIFICHE TECNICHE Sul dispositivo master (SW3 Dip 2,3 = OFF) per abili- Formato e montaggio: Serie 6200 Series - Superficie tare la chiama e ricezione chiamata a/da centralino Pulsanti: di portineria settare il Dip4 di SW3 in ON ed il Dip1 Programmazioni:... - Page 10 Serie 6200 Serie 6200 Istruzioni di installazione a parete Fig. 1 Fig. 2 Fig. 3 Fig. 5 Fig. 4 Fig. 6 Fig. 7 1. Per installare il videocitofono è necessario aprirlo separando la base dal coperchio che ospita tutta l’elettronica dello stesso: scollegare la cornetta dal videocitofono rimuovendo il relativo plug quindi inserire la punta di un giravite piatto da 5.5mm nella clip dopodiché...
- Page 11 Série 6200 Art. 6286 Vidéophone 3,5" en couleurs R01A 27 mm 144 mm PT3 PT2 Fig. 1 Partie avant Fig. 2 Dos DESCRIPTION LÉGENDE Un visiophone intelligent utilisant un écran LCD 3,5” à matrice Bornier de connexion active couleur pour le VX2300. Incluant 4 boutons “service”, “vie Interrupteur de terminaison BUS privée/bus activation du relais”, “appel porte ouverte/intercom- Interrupteur DIP 4 voies...
-
Page 12: Programmation
Série 6200 Art. 6286 Vidéophone 3,5" en couleurs RÉGLAGES Contrôle du volume de la tonalité d’appel LED confidentialité allumée (3 niveaux). Elle s'allume lorsque le service est en marche. Contrôle de la luminosité LED d'usage général (roue coulissante). Il est alimenté par les bornes +DOL et –DOL de la carte Régulateur d’intensité... -
Page 13: Adresse Du Vidéophone - Sw1
Série 6200 Art. 6286 Vidéophone 3,5" en couleurs ADRESSE DU VIDÉOPHONE - SW1.1..7 Le tableau ci-dessous indique comment définir l'adresse du vidéophone. En considérant que ON = 1 et OFF = 0, multipliez chaque chiffre par son poids décimal puis additionnez les valeurs obtenues pour calculer 1 2 3 4 5 6 7 l'adresse : Par exemple, comme le montre le tableau, la séquence OFF, ON, OFF, OFF, ON en binaire correspond SW1.1..7... -
Page 14: Caractéristiques Techniques
Série 6200 Art. 6286 Vidéophone 3,5" en couleurs NOTICE D’UTILISATION CONCIERGE CARACTÉRISTIQUES TECHNIQUES Sur l’appareil master (SW3 Dip 2,3 = OFF) pour Format et ssemblage : Série 6200 - De surface activer l’appel et la reception de l’appel à/du Boutons : concierge mettre le Dip4 ui SW3 sur ON et le Dip1 Programmazioni: Grâce aux interrupteurs DIP et des... - Page 15 Série 6200 Série 6200 Instructions d'installation murale Fig. 1 Fig. 2 Fig. 3 Fig. 5 Fig. 4 Fig. 6 Fig. 7 1. Pour installer l’interphone vidéo il faut l’ouvrir en séparant la base du couvercle qui contient toute son électronique : débranch- er le combiné...
- Page 16 (power off then power on). 12Vac Title: Data creazione: Foglio 02/02/2017 Titolo: Data modifica: 06/02/2017 Videx Electronics S.p.A. Notes: Autore: Marco Rongoni Via del Lavoro 1, 63020 Monte Giberto (AP) Note: Cod.File: Phone: +39 0734 631669 - Fax +39 0734 631669 esvk-62h-001.dwg www.videx.it - info@videx.it...
- Page 17 (power off then power on). Title: Data creazione: Foglio 03/02/2017 Titolo: Data modifica: 01/03/2017 Videx Electronics S.p.A. Notes: Autore: Marco Rongoni Via del Lavoro 1, 63846 Monte Giberto (FM) Note: Cod.File: Phone: +39 0734 631669 - Fax +39 0734 631669 esvk-62h-006.dwg...
- Page 18 Local Bell Local Bell ART.6286 ART.6286 Extension N. Extension N. Videophone: Videophone: BUS OUT 1 BUS OUT 2 BUS OUT 3 BUS OUT 4 Close Close Close Close Open Open Open Open AMPLIFICATION BUS LINE TERMINATION Art.317N Local Bell Local Bell ART.6286 ART.6286 Extension N.
- Page 19 (power off then power on). Title: Data creazione: Foglio 02/02/2017 Titolo: Data modifica: 06/02/2017 Videx Electronics S.p.A. Notes: Autore: Marco Rongoni Via del Lavoro 1, 63020 Monte Giberto (AP) Note: Cod.File: Phone: +39 0734 631669 - Fax +39 0734 631669 esvk-62h-003.dwg www.videx.it - info@videx.it...
- Page 20 - 20 - 66251130 - V4.8 - 15/05/22...
- Page 21 - 21 - 66251130 - V4.8 - 15/05/22...
- Page 22 - 22 - 66251130 - V4.8 - 15/05/22...
-
Page 23: Smaltimento
DISPOSAL In accordance with the Legislative Decree no. 49 of 14 March 2014 “Implementation of the Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)”. The crossed-out bin symbol on the equipment or on the packaging indicates that when the product reaches the end of its lifetime, it must be collected separately from mixed municipal waste. - Page 24 MANUFACTURER VIDEX ELECTRONICS S.P.A. FABBRICANTE Via del Lavoro, 1 FABRICANT 63846 Monte Giberto (FM) Italy FABRICANTE Tel (+39) 0734 631669 FABRIKANT Fax (+39) 0734 632475 www.videx.it - info@videx.it FABRICANTE ال� ش كة المص ن ِّ عة CUSTOMER SUPPORT VIDEX ELECTRONICS S.P.A.