Before Reading The User's Manual; How To Use The Dvd Recorder - Samsung DVD-R120 Manuel De L'utilisateur

Before reading the user's
manual
Make sure to check the following
reading the user's manual.
Icons that will be used in manual
Icon Term
This involves a function available
in DVD or DVD-R/DVD-RW
DVD
discs that have been recorded
and finalised in Video Mode.
This involves a function available
RAM
in DVD-RAM.
This involves a function available
RW
in DVD-RW.
This involves a function available
R
in DVD-R.
This involves a function available
CD
in a data CD (CD-R or CD-RW).
This involves a function available
JPEG in a data picture CD (CD-R or
CD-RW).
This involves a function available
in a data CD (CD-R or CD-RW
MP3
on which MP3 is recorded).
This involves a function available
in a data CD-R/RW,DVD-R,
MPEG4
RW,RAM.
This involves a case where a
Caution function does not operate or
settings may be cancelled.
This involves tips or instructions
NOTE on the page that help each
function operate.
One-Touch A function that can be operat
button by using only one button.
ANYKEY A function that can be operated
button by using Any Key button.
About the use of this user's manual
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~5)
2) If a problem occurs, check for Troubleshooting.
(See pages 88~91)
Copyright
©2005 Samsung Electronics Co.
All rights reserved; No part or whole of this user's
manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
terms before
Definition
How to use the DVD
Recorder
Step 1
Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or
you want to edit the disc after recording, select a
rewritable DVD-RW or DVD-RAM type disc.
If you want to save recording without any change,
choose a non-rewritable DVD-R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts
formatting when an unused disc is inserted. This is
required for the preparation of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded
image and create a playlist and edit images in a
specific sequence according to your requirements.
Using a DVD-RW
This type of disc can be formatted in either DVD-Video
format (Video mode) or DVD-Video Recording format
(VR mode). For an unused disc, a message that asks
whether to format in VR Mode or not is displayed.
You can play a Video mode disc on various DVD
components. A VR mode disc allows more varied
editing.
Using a DVD-R
This type of disc can be formatted in DVD Video
format. After formatting is complete, you can record on
the disc. You can play this type of discs on various
DVD components only when they have been finalised.
You can only use either the VR or
Video mode on a DVD-RW, but not
NOTE
both at the same time.
You can change the DVD-RW
format to another format by
reinitializing. It should be noted that
the disc's data will be lost when
changing formats.
9
English -